Tailgate Lettering Vinyl Inserts Decals For 2018+ Ford F-150 Choose Color

Description

Sale is for ONE set of vinyl letter inserts
Lettering is cut of ORACAL 651 High Temp Outdoor Gloss Vinyl, perfect for hot exterior paint and panels
(Same vinyl used for engine cover and brake caliper decals to withstand heat)
[DECALS ARE AVAILABLE IN 8 COLORS]:
--GLOSS BLACK
--MATTE BLACK
--GLOSS RED
--METALLIC SILVER (Not chrome)
--GLOSS WHITE
--GLOSS BLUE
--GLOSS YELLOW
--GLOSS LIME GREEN
*INSTALLATION TIP*
Since the letter decals are installed in sunken in indentions, I highly recommend the use of soapy water, a heat gun, a soft cloth, and a small squeegee.
I also prefer to remove the letter from both the backing paper and transfer paper (clear paper). This is not required but does better allow freely adjusting/positioning the letter.
- Wetting the vinyl letters AND tailgate will allow you to position the letters where you want them without prematurely sticking.
- Use the heat gun to lightly warm the vinyl, this will dry some of the soapy water and allow the vinyl to better adhere/contour now that it's in the position you want.
- When warmed up, apply pressure with a soft cloth or microfiber towel to squeeze and absorb remaining soapy water. This also provides better pressure distribution across the decal to ensure it contours properly as the vinyl is softened.
---If you used the transfer paper, peel the transfer paper off leaving only the vinyl letter sticking to the tailgate.
--- DO NOT PULL UP/TOWARDS YOU, Pull the transfer paper at a sharp angle, almost perpendicular to the decal being transfered, this angle makes it much harder for the decal to be lifted off and will instead stay adhered to the body.
- Once all letters are applied, heat all letters lightly and apply pressure/squeegee to extract any remaining water and/or air bubbles.
(These instructions are only a suggestion, if you are more comfortable with another method, then please do so. I am not responsible for improper installation.)
Thanks for looking!!